|
CNC CONTROL
ESAB Autopath CNC control originally used on a plasma cutting machine. Excellent condition, exceptionally clean. The CNC electronics are by ATAS, microprocessor based control, color graphics display,full front panel with alpha-numeric keypad, jog buttons, speed potentiometer. Process control panel has station select buttons, torch up-down switches, digital delay timer for gas torch preheat time, process control buttons, and an emergency stop switch.
The bottom section of the enclosure below the keypad, is a pc board rack that contains all the station interface cards and power supplies
The back of the enclosure has a fuseholder panel and all the connectors to go to the stations, drives, limit switches, etc. All of these are plastic amphenol connectors. I do not have the necessary mating connectors that would be on the end of your cables to the station plugs on the back of the enclosure, I do not have mating connectors for the external e-stop and home position switch inputs. I do have mating connectors on the power cable and the drive outputs to the servo amps. I do have manuals and schematics. The motors and encoders are currently connected and the unit sits functional in my workspace.
CNC software has color part contour displayed with running point to show current position. Program reverse. Part programs either word address (g-code) or essi. Automatic kerf compensation, standard shapes in e-prom, program input from rs232 serial port. On-screen plate remnant digitize and manual nesting of parts on the remnant. Program rotation, step and repeat for multiple parts
click on the pictures to download
|
|
